![](picsOndes/title89.gif)
![](picsOndes/11%20InsideSM.jpg)
Mounting the pulleys.
![](picsOndes/13%20Fingerboard.jpg)
The fingerboard, with depressions
drilled and brads nailed in.
![](picsOndes/18%20pulley.jpg)
The 10-turn, 100K pot, attached
to a pulley wheel.
This replaces the pot in the bottom of the original Q125 signal
processor module (www.synthesizers.com)
![](picsOndes/19%20Spring.jpg)
The tension spring is directly
under the finger ring, deep inside the instrument.
Go
to Page Three